Scale and Corrosion Can Cost You Money

Untreated fluid used in boilers, hot water systems, cooling towers and other equipment contains dissolved salts, gasses and traces of many minerals and metals. There elements are the direct cause of scale buildup in pipes and equipment. If left unchecked, scale buildup can increase costs, downtime and may eventually result in dangerous explosive potential.

Ordinary Scale Prevention Isn’t the Answer

Most scale prevention techniques are either chemical or electrical and all require the constant use of water treatment chemicals or expenditures for power and bulky equipment. Higher operating and maintenance costs, expensive labor and pollution are also a part of these ordinary water treatment processes.

Magna Force Offers You a Better Alternative

Magna Force units are completely self-contained. The unit is powered by a highly intensified, directional magnetic field requiring no outside power source.

How the Magna Force Unit Actually Works

Fluids passing through the unit are exposed to powerful, permanent magnetic fields which physically effect the structure of suspended particles in the fluid. Each of these submicron particles have now been installed with a high surface charge which is carried along into the unit.

As they flow through the unit contacting the deposited materials, a transfer of charge occurs. This charge transfer causes a disruption in the state of the deposited material. The deposit is slowly eroded away by the scouring action of the fluid flow. At a point in the unit where there is low velocity flow such as in a sump, storage tank, etc., the submicron particles settle and can be readily removed by blow down, sump flushing or bleed off.

What Does This Mean to You?

In simple terms, the Manga Force Unit will aid in the control of scale and many corrosion causing elements. Our unit provides proven results that will reduce your treatment costs, improve machinery efficiency and save money by reducing electricity consumption.

Removes Old Scale - Prevents New Deposits

The Magna Force Unit will help prevent new scale deposits from forming and will also gradually disintegrate any scale remaining in the system. In some cases, when the unit is first installed, a faster disintegration action will take place until the looser deposits are removed. Filters should be checked during this period as needed. The time required for complete scale removal will depend upon composition of the deposits.

After the scale has been removed, a layer of charged particles approximately 0.003 inch thick will adhere to the base metal. This soft, powdery layer is a characteristic side effect of the treatment and will not adversely effect operation of the unit.